PERUBAHAN SIFAT FISIK DAN CITA RASA KOPI ARABIKA ASAL BONDOWOSO PADA BERBAGAI TINGKAT PENYANGRAIAN

Authors

  • Hasbi Mubarak Suud Prodi Ilmu Pertanian, Universitas Jember
  • Dyah Ayu Savitri Prodi Ilmu Pertanian, Universitas Jember
  • Safa Rajni Ismaya Prodi Ilmu Pertanian, Universitas Jember

DOI:

https://doi.org/10.31764/jau.v8i2.5238

Keywords:

Arabica Coffee, Flavor, Java Arabica Coffee, Physical Properties, Roasting

Abstract

Arabica coffee from the plantation on the foothill of Ijen-Raung mountains in Bondowoso is well known for its Java Arabica Coffee specialty. The exploration to strengthen the specialty identity is keep going on. This study aims to determine the changes in physical properties and flavor of that arabica coffee during roasting at various times and temperatures of roasting. The aspects of physical properties that were studied include weight to volume ratio, coffee bean dimension, and a color index of RGB (red green blue). The weight-to-volume ratio and color index of RGB decreased as the time and temperature roasting increased. The change in dimension of the coffee bean was caused by roasting also detected, but not dominant signifies the roasting level. This is due to the dimension change of coffee bean in each roasting profile having tiny differences and the dimension of the green bean had high variation. Based on this study, it is known that the roasting with a maximum temperature of 165°C and total time process of 9.5 minutes gives the highest total score of aroma, flavor, acidity, and aftertaste of that arabica coffee. 

References

Agustini, S. (2020) ‘perubahan sifat fisika kimia kopi robusta asal semendo pada berbagai level penyangraian’, Jurnal Dinamika Penelitian Industri, 31(1), p. 79. doi: 10.28959/JDPI.V31I1.6144.

Amri, A. F. et al. (2020) ‘identifikasi profil kualitas kopi sebagai acuan pengembangan produk spesialti di kawasan menoreh, kulon progo, yogyakarta’, Jurnal Industri Hasil Perkebunan, 15(1), pp. 17–28. Available at: http://litbang.kemenperin.go.id/bbihp/article/view/5776 (Accessed: 30 August 2021).

Anisa, A., Solomon, W. K. and Solomon, A. (2017) ‘Optimization of roasting time and temperature for brewed hararghe coffee (Coffea Arabica L.) using central composite design’, International Food Research Journal 2, 24(6), pp. 2285–2294. Available at: https://www.researchgate.net/publication/343648384_Optimization_of_roasting_time_and_temperature_for_brewed_hararghe_coffee_Coffea_Arabica_L_using_central_composite_design (Accessed: 31 August 2021).

Bustomi, M. A. and Dzulfikar, A. Z. (2014) ‘Analisis Distribusi Intensitas RGB Citra Digital untuk Klasifikasi Kualitas Biji Jagung menggunakan Jaringan Syaraf Tiruan’, Jurnal Fisika dan Aplikasinya, 10(3), pp. 127–132. doi: 10.12962/J24604682.V10I3.791.

Edzuan, A. M. F., Majid, N. A. A. and Bong, H. L. (2015) ‘Physical and Chemical Property Changes of Coffee Beans during Roasting’, American Journal of Chemistry, 5(3A), pp. 56–60. doi: 10.5923/C.CHEMISTRY.201501.09.

Folmer, B. (2017) The Craft and Science of Coffee. 1st edn. London: Academic Press.

Jokanović, M. R. et al. (2012) ‘Changes of physical properties of coffee beans during roasting’, Acta Periodica Technologica, 43, pp. 21–31. doi: 10.2298/APT1243021J.

Münchow, M. et al. (2020) ‘Roasting Conditions and Coffee Flavor: A Multi-Study Empirical Investigation’, Beverages 2020, Vol. 6, Page 29, 6(2), p. 29. doi: 10.3390/BEVERAGES6020029.

Nuraniza, N., Lapanporo, B. P. and Arman, Y. (2013) ‘Uji Kualitas Minyak Goreng Berdasarkan Perubahan Sudut Polarisasi Cahaya Menggunakan Alat Semiautomatic Polarymeter’, PRISMA FISIKA, 1(2), pp. 87–91. doi: 10.26418/PF.V1I2.3014.

Permatasari, P. C. (Prisca), Basith, A. (Abdul) and Mulyati, H. (Heti) (2018) ‘Model Bisnis Inklusif Rantai Nilai Kopi Arabika di Bondowoso Jawa Timur’, Jurnal Manajemen Teknologi, 17(2), pp. 111–125. doi: 10.12695/JMT.2018.17.2.3.

Pimenta, t. V. Et al. (2009) ‘roasting processing of dry coffee cherry: influence of grain shape and temperature on physical, chemical and sensorial grain properties’, Boletim do Centro de Pesquisa de Processamento de Alimentos, 27(1), pp. 97–106. doi: 10.5380/CEP.V27I1.14956.

Pittia, P., Dalla Rosa, M. and Lerici, C. R. (2001) ‘Textural Changes of Coffee Beans as Affected by Roasting Conditions’, LWT - Food Science and Technology, 34(3), pp. 168–175. doi: 10.1006/FSTL.2000.0749.

Prabowo, D. A. and Abdullah, D. (2018) ‘Deteksi dan Perhitungan Objek Berdasarkan Warna Menggunakan Color Object Tracking’, Pseudocode, 5(2), pp. 85–91. doi: 10.33369/PSEUDOCODE.5.2.85-91.

Rao, S. (2014) The Coffee Roaster’s Companion by Scott Rao. first edition. Available at: https://www.scottrao.com/ (Accessed: 9 June 2021).

Rodrigues, M. A. A. et al. (2002) ‘Evolution of physical properties of coffee during roastin’, pp. 1-. doi: 10.13031/2013.9759.

SCAA (2015) SCAA Protocols | Cupping Specialty Coffee. Available at: https://www.scaa.org/PDF/resources/cupping-protocols.pdf (Accessed: 15 May 2021).

Downloads

Published

2021-10-28

Issue

Vol. 8 No. 2 (2021): October 2021

Section

Articles

License

Authors who publish articles in Jurnal Agrotek Ummatagree to the following terms:
  1. Authors retain copyright of the article and grant the journal right of first publication with the work simultaneously licensed under a CC-BY-SA or The Creative Commons Attribution–ShareAlike License.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).