PENINGKATAN HARDSKILL MASYARAKAT MELALUI KEGIATAN WIRAUSAHA BENGKEL LAS
DOI:
https://doi.org/10.31764/jmm.v7i1.12328Keywords:
Welding, COVID-19, Personal protective equipment, SMAW, Workshop.Abstract
Abstrak: Pandemi COVID-19 sedang menjangkit diseluruh dunia, termasuk di Indonesia. Dengan pandemi tersebut diberlakukan Pembatasan Sosial Berskala Besar (PSBB). Dampak sosial dari PSBB adalah banyaknya pemutusan hubungan kerja di Indonesia, khususnya di Jakarta. Untuk mengatasi masalah pengangguran yang tinggi, kami mengadakan pelatihan pengelasan. Tujuannya untuk menambahkan hard skill di bidang pengelasan. Target kami adalah penduduk sekitar kampus Universitas Nasional. Pelatihan ini menggunakan metode hybrid. Metode ini dengan menggabungkan daring untuk teori pengelasan dan metode mandiri untuk praktek pengelasan. Pelatihan berhasil diikuti oleh 41 peserta. Hasil pelatihan menunjukkan peningkatan yang signifikan bagi peserta. Berdasarkan hasil tes awal menunjukkan nilai 57,32% dan tes akhir sebesar 74,88% atau mengalami peningkatan 30,64%.
Abstract: The COVID-19 pandemic is sweeping across the world, including in Indonesia. With this pandemic, Large-Scale Social Restrictions were imposed. The social impact of the PSBB is the spread of layoffs in Indonesia, especially in Jakarta. To deal with high irritation, we hold welding training. The goal is to add hard skills in the field of welding. The target is residents around the campus of the National University. The training method combines bold for welding theory and a self-contained method for welding practice. Forty-one participants successfully attended the training. The results of the exercise showed significant improvement for the participants. Based on the results of the initial test, it showed a value of 57.32%, and the final test was 74.88%, or an increase of 30.64%.
Â
References
Azwinur, A., Marzuki, M., & Anwar, A. (2018). Pelatihan Las Argon Untuk Pekerja Usaha Bengkel Las Masyarakat Gampong Mesjid Punteuet Dalam Upaya Meningkatkan Pendapatan Masyarakat Masyarakat. Jurnal Vokasi - Politeknik Negeri Lhokseumawe, 2(1). https://doi.org/10.30811/vokasi.v2i1.652
Bakhori, A. (2017). Perbaikan Metode Pengelasan SMAW (Shield Metal Arc Welding) Pada Industri Kecil Di Kota Medan. Buletin Utama Teknik, 13(1), 14–21.
Basori, B., & Susetyo, F. B. (2020). Optimasi Suhu dan Waktu Tahan Furnace Terhadap Kekerasan dan Mikro Struktur Deposit Lasan Elektroda Hardfacing. Jurnal Kajian Teknik Mesin, 5(2), 83–86. https://doi.org/10.52447/jktm.v5i2.4119
Kurniati, I. D., Setiawan, R., Rohmani, A., Lahdji, A., Tajally, A., Ratnaningrum, K., Basuki, R., Reviewer, S., & Wahab, Z. (2015). Buku Ajar.
Kusuma, I., Djauhari, F., Retno, Nugroho; Retno Nugroho, E., & Utama, H. S. (2022). Characteristics of Energy Consumption in Apartment during The COVID-19 Pandemic in Indonesia. 11(6). https://doi.org/10.15680/IJIRSET.2022.1106001
Luo, J. (2020). When Will COVID-19 End ? Data-Driven Prediction. 1–6.
Nugroho, Endang Retno; Ruliyanta, R. (2020). Forecast of COVID-19 Cases in Indonesia with the Triple Exponential Smoothing Algorithm Perkiraan Kasus COVID-19 di Indonesia dengan Algoritma Triple Exponential Smoothing. Jurnal Ilmiah GIGA Volume 23 (2) November 2020, 23(November), 61–68.
Putri, P. S. (2020). Pelatihan Pelaksanaan K3 Terhadap Risiko Kebakaran Di Madrasah Ibtidaiyah Al Huda. Terang, 3(1), 49–55. https://doi.org/10.33322/terang.v3i1.1013
Rosidi, R., Yuwono, B., & Yuhas, D. (2019). Analisa Variasi Kuat Arus Elektroda E6013 Terhadap Sambungan Las Pada Pelat Baja Untuk Tabung Gas 3 Kg. Jurnal Poli-Teknologi, 18(3), 233–242. https://doi.org/10.32722/pt.v18i3.2341
Ruliyanta, Keraf, A., Kusuma, I., & Suwodjo Kusumoputro, R. . (2021). Load Flow Analysis Capacitor Bank dengan Metode Kompensasi Individu dan Kompensasi Global. Jurnal Ilmiah GIGA, 24(1), 22–23.
Ruliyanta, R., Keraf, A., & Nugroho, E. R. (2022). Optimization of electric load flow at Jakarta International Stadium with Newton Raphson method Optimization of Electric Load Flow at Jakarta International Stadium with Newton Raphson Method. 050004(November).
Ruliyanta, R., Suwodjo Kusumoputro, R. A., Nugroho, R., & Nugroho, E. R. (2022). A Novel Green Building Energy Consumption Intensity: Study in Inalum Green Building. 1–6. https://doi.org/10.1109/tensymp54529.2022.9864532
Ruliyanto, R. (2020). Pengaruh Ketidakseimbangan Beban Terhadap Arus Netral dan Arus Ground pada Trafo 1 dan Trafo 2 pada Beban Puncak Sesaat. Jurnal Ilmiah Giga, 23(1), 27. https://doi.org/10.47313/jig.v23i1.867
Tiwari, R., & Nilsen, R. (2019). Active Compensation of Unbalanced Load Currents in Grid Connected Voltage Source Converters. ICPE 2019 - ECCE Asia - 10th International Conference on Power Electronics - ECCE Asia, 3, 945–950. https://doi.org/10.23919/icpe2019-ecceasia42246.2019.8797149
Wismanto Setyadi. (2022). Pelatihan Layanan Prima bagi Management Gedung Inalum Kuala Tanjung. Jurnal Pengabdian Kepada Masyarakat TEKNO, 3(1), 32–38.
Downloads
Published
Issue
Section
License
Authors who publish articles in JMM (Jurnal Masyarakat Mandiri) agree to the following terms:
- Authors retain copyright of the article and grant the journal right of first publication with the work simultaneously licensed under a CC-BY-SA or The Creative Commons Attribution–ShareAlike License.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
