PEMBUATAN TEKNOLOGI TEPAT GUNA UNTUK PENGOLAHAN LIMBAH PLASTIK
DOI:
https://doi.org/10.31764/jmm.v7i3.14548Keywords:
Appropriate technology, plastik waste, handcrafts.Abstract
Abstrak : Plastik merupakan material yang berfungsi membantu kehidupan manusia dari segala aspek, namun karena material tersebut tidak dapat terbiodegradasi, maka sangat berbahaya bagi lingkungan. Pengrajin limbah plastik di Desa Iloponu, yang diketuai oleh Bapak Eka Rahim dan beranggotakan 6 orang, menjadikan limbah tersebut sebagai bahan baku kerajinan tangan yang bernilai jual, tetapi masih terdapat sedikit timbulan plastik dari aktivitas mereka; (2) Tujuan pengabdian ini adalah untuk memberikan solusi atas permasalahan yang dihadapi melalui pembuatan TTG berupa alat pencacah plastik, serta perawatannya; (3) Metode kegiatan ini terdiri dari 3 tahap yaitu pra kegiatan, pelaksanaan kegiatan, dan evaluasi , dengan melibatkan pemerintah Desa Iloponu, Kecamatan Tibawa. Tahap evaluasi dilakukan pasca pendistribusian alat dengan melihat apakah ada kerusakan pada alat, apabila terdapat keruskan, maka tim langsung memperbaikinya; dan (4) Hasil kegiatan yang diperoleh adalah masyarakat pengrajin limbah plastik terbantu dengan adanya alat yang diberikan oleh tim pengabmas, sebagai solusi mengatasi limbah plastik yang timbul dari aktivitas mereka. Dimana, 35% limbah yang tidak terapakai dapat diolah melalui tongpas dan alat pencacah plastik.
Abstract:Â Plastic is a material that functions to help human life from all aspects, but because this material cannot be biodegraded, it is very dangerous for the environment. The plastic waste craftsmen in Iloponu Village, chaired by Mr. Eka Rahim and have 6 members, make this waste a valuable raw material for handicrafts, but there is still a small amount of plastic generated from their activities; (2) The purpose of this service is to provide solutions to the problems faced by making TTG in the form of a plastic chopper, as well as its maintenance; (3) This activity method consists of 3 stages, namely pre-activity, implementation of activities, and evaluation, involving the government of Iloponu Village, Tibawa District. The evaluation stage is carried out after the distribution of the tools to see if there is damage to the tools, if there is damage, the team immediately fixes it; and (4) The results of the activities obtained are that the plastic waste craftsman community is assisted by the tools provided by the community service team, as a solution to dealing with plastic waste arising from their activities. Where, 35% of unused waste can be processed through tongpas and plastic choppers.
Â
References
Abdel-Shafy, H. I., & Mansour, M. S. M. (2018). Solid waste issue: Sources, composition, disposal, recycling, and valorization. Egyptian Journal of Petroleum, 27(4), 1275–1290. https://doi.org/10.1016/j.ejpe.2018.07.003
APO. (2014). Report of the APO Survey on Solid-Waste. In Asian Productivity Organization (APO). www.apo-tokyo.org
Ejaz, N., Akhtar, N., Nisar, H., & Ali Naeem, U. (2013). Environmental impacts of improper solid waste management in developing countries: A case study of Rawalpindi City. WIT Transactions on Ecology and the Environment, 142, 379–387. https://doi.org/10.2495/SW100351
Global Waste Management Outlook. (2016). In Global Waste Management Outlook. https://doi.org/10.18356/765baec0-en
Hiola, R., & Lalu, N. A. S. (2017). Pengolahan Sampah Plastik Dengan Metode Penyulingan Sederhana Menjadi Minyak Mentah Di Desa Dambalo Kecamatan Tomilito Kabupaten Gorontalo Utara. E Jurnal UNG, 1(1), 1–30.
IYFS. (2014). Plastik Waste Handling & Recycling Project for Protection of Local Environment.
Novia, T. (2021). Pengolahan Limbah Sampah Plastik Polytthylene. Gravitasi Jurnal Pendidikan Fisika Dan Sains, 4(4), 33–41.
Pani, S., Sukarja, H., & P, Y. S. (2017). Dengan proses pirolisis berbahan baku plastik. Jurnal Engine, 1(1), 32–38.
Renilaili, R. (2019). Metode Pyrolisis Upaya Untuk Mengkonversi Limbah Plastik Menjadi Bahan Bakar Cair Alternatif. Integrasi : Jurnal Ilmiah Teknik Industri, 4(1), 9. https://doi.org/10.32502/js.v4i1.2093
Santhi, D. (2016). Plastik Sebagai Kemasan Makanan Dan Minuman. Bagian Patologi Klinik PSPD FK UNUD, April, 1–3.
Septiani, B. A., Arianie, D. M., Risman, V. F. A. A., Handayani, W., & Kawuryan, I. S. S. (2019). Pengelolaan Sampah Plastik Di Salatiga: Praktik, dan tantangan. Jurnal Ilmu Lingkungan, 17(1), 90. https://doi.org/10.14710/jil.17.1.90-99
Silalahi, U. (2015). Metode Penelitian Sosial Kuantitatif. Journal of Visual Languages & Computing, 11(3), 287–301.
Suardi, L. R., Gunawan, B., Arifin, M., & Iskandar, J. (2018). A Review of Solid Waste Management in Waste Bank Activity Problems. International Journal of Environment, Agriculture and Biotechnology, 3(4), 1518–1526. https://doi.org/10.22161/ijeab/3.4.49
Thabit, Q., Nassour, A., & Nelles, M. (2022). Facts and Figures on Aspects of Waste Management in Middle East and North Africa Region. Waste, 1(1), 52–80. https://doi.org/10.3390/waste1010005
Zurbrügg, C., & Schertenleib, R. (2016). Main Problems and Issues of Municipal Solid Waste Management in Developing Countries with Emphasis on Problems Related to Disposal by Landfill. Third Swedish Landfill Research Symposia, 2–9.
Downloads
Published
Issue
Section
License
Authors who publish articles in JMM (Jurnal Masyarakat Mandiri) agree to the following terms:
- Authors retain copyright of the article and grant the journal right of first publication with the work simultaneously licensed under a CC-BY-SA or The Creative Commons Attribution–ShareAlike License.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
