DESAIN DAN MANUFAKTUR PENGOLAH SAMPAH PLASTIK UNTUK PASAR DESA DARMAYASA JAWA TENGAH
DOI:
https://doi.org/10.31764/jmm.v7i3.14838Keywords:
Crushing machine, manufacturing, plastic waste.Abstract
Abstrak: Desa Darmayasa merencanakan pembangunan pasar desa. Selain segi kemanfaatannya, pasar juga memberikan potensi permasalahan yaitu timbulnya sampah, terutama sampah plastik yang tidak dapat diurai ditanah. Tim Pengabdian Masyarakat UMY melakukan pemetaan kebutuhan teknologi pengolahan sampah plastic kemudian melakukan perancangan dan pembuatan peralatan pengolah sampah plastik, baik yang dihasilkan oleh pasar maupun dari buangan rumah tangga. Tujuan kegiatan adalah untuk merancang dan membuat peralatan pengolah sampah plastik untuk mengurangi dampaknya pada kondisi lingkungan dan juga meningkatkan kesejahteraan masyarakat di Desa Darmayasa.
Abstract: The village of Darmayasa is planning to build a village market. Besides its benefits, the market also has the potential for issues, such as the generation of waste, especially plastic waste that cannot decompose on the ground. The Community Service Team from UMY mapped the technology needs for plastic waste processing, then designed and made equipment to process plastic waste from the market and household waste. The goal of this activity is to design and make plastic waste processing equipment to reduce its impact on the environment and also improve the welfare of the community in Darmayasa village.
References
Anam, C., Rulianto, J., Muzakar, K., & Setiadevi, S. (2022). Penerapan Teknologi Mesin Crusher (Pencacah Plastik) Untuk Pengolah Sampah An-Organik Sebagai Upaya Peningkatan Nilai Ekonomis Di Desa Tambong Kabupaten Banyuwangi. Jurnal Dianmas, 11(2), 76–85.
Darus, N., Tamimi, M., Tirawaty, S., Muchtazar, M., Trisyanti, D., Akib, R., Condorini, D., & Ranggi, K. (2020). an Overview of Plastic Waste Recycling in the Urban Areas of Java Island in Indonesia. Journal of Environmental Science and Sustainable Development, 3(2), 402–415. https://doi.org/10.7454/jessd.v3i2.1073
Gao, S., & Shao, B. (2022). Why Do Consumers Switch to Biodegradable Plastic Consumption? The Effect of Push, Pull and Mooring on the Plastic Consumption Intention of Young Consumers. Sustainability (Switzerland), 14(23)halaman?. https://doi.org/10.3390/su142315819
Haig, S., Morrish, L., Morton, R., Onwuamaegbu, U., Speller, P., & Simon, W. (2015). Plastics to oil products. Xionconsulting,vol? issue? 1–155.
Hasaya, H., & Masrida, R. (2021). Potensi Pemanfaatan Ulang Sampah Plastik Menjadi Eco-Paving Block. Jurnal Jaring SainTek, 3(1), 25–31. https://doi.org/10.31599/jaring-saintek.v3i1.478
Ikram, M., & Nur, M. J. (2012). Peranan Pasar Tradisional Dalam Meningkatkan Kesejahteraan Masyarakat (Studi Kasus Pada Pasar Pa’baeng-Baeng Di Kecamatan Tamalate Kota Makassar). Balance Jurnal Ekonomi, 8(2), 1–13.
Ketjil, M. I., Masinambow, V., & Sumual, J. (2022). Peran Pasar Tradisional Dalam Meningkatkan Kesejahteraan Masyarakat Di Kecamatan Bolang Itang Timur Kabupaten Bolaang Mongondow Utara. Jurnal Berkala Ilmiah Efesiensi, 22(8), 37–48.
Lange, J. P. (2021). Managing Plastic Waste-Sorting, Recycling, Disposal, and Product Redesign. ACS Sustainable Chemistry and Engineering, 9(47), 15722–15738. https://doi.org/10.1021/acssuschemeng.1c05013
Putra, H. P., & Yuriandala, Y. (2010). Study of Using Plastic Waste to Become Creative Products and Services. Jurnal Sains &Teknologi Lingkungan, 2(1), 21–31.
Ryberg, M. W., Laurent, A., & Hauschild, M. (2018). Mapping of global plastics value chain and plastics losses to the environment (with a particular focus on marine environment). United Nations Environment Programme,vol? issue? 1–99. https://gefmarineplastics.org/files/2018 Mapping of global plastics value chain and hotspots - final version r181023.pdf
Sharma, S., & Mallubhotla, S. (2019). Plastic Waste Management Practices- Issues, solutions & case studies. Ministry of Housing and Urban Affairs, March,vol? issue? 105–113. www.mohua.gov.in
Suartika, I. M., Wijana, M., & Sudrajadinata, M. (2015). Kajian Tekno Ekonomi Unit Alat Pencacah Plastik Untuk Meningkatkan Nilai Jual Sampah Plastik: Studi Kasus-Ud. Sari Plastik Lombok Timur, NTB. Dinamika Teknik Mesin, 5(2), 97–105. https://doi.org/10.29303/d.v5i2.35
Sudarno, Nicolass, S., & Assa, V. (2021). Pemanfaatan Limbah Plastik Untuk Pembuatan Paving block. Jurnal Teknik Sipil Terapan, 3(2), 101–110.
Triadi, N. Y., Martana, B., & Pradana, S. (2020). Perancangan Mesin Pencacah Plastik Tipe Shredder dan Alat Pemotong Tipe Reel. Jurnal Rekayasa Mesin, 15(2), 144. https://doi.org/10.32497/jrm.v15i2.1892
Yantony, D., Tosaleng, H. L., & Taslim, K. (2019). Rancang Bangun Mesin Pencacah Plastik Tipe Sumbu Menyudut untuk Usaha Mikro. JTERA (Jurnal Teknologi Rekayasa), 4(1), 47. https://doi.org/10.31544/jtera.v4.i1.2019.47-52
Downloads
Published
Issue
Section
License
Authors who publish articles in JMM (Jurnal Masyarakat Mandiri) agree to the following terms:
- Authors retain copyright of the article and grant the journal right of first publication with the work simultaneously licensed under a CC-BY-SA or The Creative Commons Attribution–ShareAlike License.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
