PENERAPAN TEKNOLOGI TEPAT GUNA MESIN MIXING SEMEN KAPASITAS 50KG DI BASAN KULON
DOI:
https://doi.org/10.31764/jmm.v6i4.9023Keywords:
Cement Mixer, Infrastructure, Service.Abstract
Abstrak: Berdasarkan data dan observasi yang telah dilakukan, Basan Kulon memerlukan perhatian khusus dalam bidang pembangunan infrastruktur. Sejumlah 60% jalan belum ditalut dan masih ada beberapa titik belum dicor. Perkembangan pembangunan disana masih sangat lambat. Maka dari itu dibutuhkan alat/mesin yang mampu membantu warga untuk meningkatkan percepatan dalam pembangunan infrastruktur. Pengabdian ini bertujuan untuk meningkatkan efisiensi pembangunan, meningkatkan taraf kesejahteraan masyarakat. Metode pelaksanaan kegiatan pengabdian di masyarakat ini pertama dilakukan penyamaan persepsi terkait kebutuhan alat di masyarakat, berikutnya dilakukan perancangan mesin yang sesuai dengan kebutuhan. Selanjutnya dilakukan pembuatan mesin dan dilanjutkan dengan sosialisasi penggunaan dan perawatan mesin. Program pengabdian kepada masyarakat ini menghasilkan peningkatan pembangunan infrastruktur sebanyak 30% selesai dikerjakan. Pekerjaan talud sebanyak 60% dan 40% pekerjaan jalan. Sehingga infrastruktur yang sudah berhasil dibangun sebanyak 70% dari baseline 40%. Sebagai tindak lanjut program, dilakukan evaluasi dan pemantauan kinerja alat. Pembuatan unit usaha sebagai tindak lanjut program, akan menjadikan penghasilan dusun yang terkoordinasi dengan baik.
Abstract: Based on the data and observations that have been made, Basan Kulon requires special attention in the field of infrastructure development. Some 60% of the roads have not been paved and there are still some spots that have not been paved. Development progress there is still very slow. Therefore, tools/machines are needed that are able to help residents increase the acceleration in infrastructure development. This activity aims to increase the efficiency of development, improve the level of community welfare. This method of implementing community service activities is first carried out by equalizing perceptions regarding the need for tools in the community, then designing machines that suit the needs. Then the machine was made and continued with the socialization of the use and maintenance of the machine. This community service program resulted in a 30% increase in infrastructure development being completed. The embankment works are 60% and 40% are road works. So that 70% of the infrastructure that has been successfully built is from the baseline 40%. As a follow-up to the program, evaluation and monitoring of tool performance was carried out. The creation of a business unit as a follow-up to the program will result in a well-coordinated hamlet income.
References
Achmad, H. H., & Supriyanto, H. (2021). Penerapan Value Engineering Pada Mesin Molen Cor Kapasitas 50 Kg: indonesia. Journal of Advances in Information and Industrial Technology, 3(1 SE-), 42–54. https://doi.org/10.52435/jaiit.v3i1.89
Aditya, C., Silviana, & Hermawati, A. (2018). Mesin Ayakan Getar Tipe Excentric Sebagai Pengayak Butiran Marmer dan Batu Alam Pada Produksi Industri Teraso dari Limbah Batu Alam di Kabupaten Tulungagung. PEDULI: Jurnal Ilmiah Pengabdian Pada Masyarakat, 2(2), 22–31. https://doi.org/https://doi.org/10.37303/peduli.v2i2.79
Arifin, Z., Prasetyo, S. D., Triyono, T., Harsito, C., & Yuniastuti, E. (2020). Rancang Bangun Mesin Pencacah Limbah Kotoran Sapi. Rekayasa Mesin, 11(2), 187–197. https://doi.org/https://doi.org/10.21776/ub.jrm.2020.011.02.6
Huda, F., & Pamungkas, S. (2010). Perancangan, Pembuatan dan Pengujian Mesin Pengayak Pasir dengan Metode Eksitasi Massa Tidak Seimbang.
Husin, I., King, M. L., Ali, H., & Krisna, O. (2021). Perancangan Mesin Molen Cor Mini Dengan Kapasitas 50 Kg. Desiminasi Teknologi, 9(1), 1–7. https://doi.org/http://dx.doi.org/10.52333%2Fdestek.v9i1.694
Kateris, D., Moshou, D., Pantazi, X.-E., Gravalos, I., Sawalhi, N., & Loutridis, S. (2014). A machine learning approach for the condition monitoring of rotating machinery. Journal of Mechanical Science and Technology, 28(1), 61–71.
Nandiwardhana, A., & Priadythama, I. (2017). Penentuan Kapasitas Mesin Dan Produktifitas Operator Dengan Menggunakan Metode Flow Material Information Chart Dan Tabel Standar Kerja Di Lini 3 PT. Garudafood. PERFORMA : Media Ilmiah Teknik Industri, 16(2), 87–92. https://doi.org/10.20961/performa.16.2.16974
Perdana, A., & Rusdiyantoro, R. (2013). Ancangan Pembuatan Mesin Pengayak Pasir Untuk Meningkatkan Produktivitas Kerja Operator. Waktu, 11(2), 41–46.
Putra, T. D. (2014). Variasi bahan material dan ukuran diameter poros dengan menggunakan metode pengujian puntir. Widya Teknika, 22(2), 116–121. https://doi.org/https://doi.org/10.31328/jwt.v22i2.117
Saferi, R., Yanto, A., & Surianda, J. (2020). Design, Fabrication and Analysis of Material Requirements of Spices Mixing Machine. Jurnal Teknik Mesin, 10(2), 123–130.
Sahadi. (2018). Faktor Utama Penyebab Keterlambatan Pelaksanaan Proyek Konstruksi Bangunan Gedung. Rancang Bangun Teknik Sipil, 2(1), 14–18.
Saraswati, N. P. A. S., Ribek, P. K., & Mudana, W. (2018). Program Pengabdian Kepada Masyarakat Melalui Peningkatan Kualitas Dan Kuantitas Produksi Patung Berbasis Limbah Di Desa Singapadu, Gianyar, Bali. SELAPARANG Jurnal Pengabdian Masyarakat Berkemajuan, 2(1), 1–6. https://doi.org/10.31764/jpmb.v2i1.555
Siahaan, E. W. B. (2018). Perancangan Mesin Pengayak Pasir Dengan Kapasitas 6 , 5 m3/jam. Jurnal Darma Agung, XXVI(1), 460–475.
Susanto, R., Ilham, M. M., & Fauzi, A. S. (2021). Rancang Bangun Tabung Pengering Cengkeh Kapasitas 15Kg. Seminar Nasional Inovasi Teknologi, 5(3), 107–112. https://proceeding.unpkediri.ac.id/index.php/inotek/article/view/1088
Vishwakarma, M., Purohit, R., Harshlata, V., & Rajput, P. (2017). Vibration analysis & condition monitoring for rotating machines: a review. Materials Today: Proceedings, 4(2), 2659–2664.
Yanto, A., Abidin, Z., Anrinal, A., & Saferi, R. (2016). An Approach for The Condition Monitoring of Rotating Machinery. Proc. The First International Conference on Technology, Innovation, and Society (ICTIS), 219–224.
Yanto, A., Anrinal, A., Saferi, R., & Memori, Z. (2020). Study of Experimental Vibration Due to Misalignment of Pulley-Belt in Rotary Machine. Jurnal Teknik Mesin (JTM), 10(2), 118–122.
Downloads
Published
Issue
Section
License
Authors who publish articles in JMM (Jurnal Masyarakat Mandiri) agree to the following terms:
- Authors retain copyright of the article and grant the journal right of first publication with the work simultaneously licensed under a CC-BY-SA or The Creative Commons Attribution–ShareAlike License.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
