Application of Numerical Newton-Raphson Method in Calculation of Emitter Water Discharge of Drip Irrigation System in “Mutis Cemerlang†Coffee Plantation
DOI:
https://doi.org/10.31764/jtam.v7i3.14947Keywords:
Hydraulic Analysis, Newton-Raphson, Drip Irigation, Emitter.Abstract
Based on the slope class, the shape of the area and the elevation of dry land in Nusa Tenggara, agricultural land in Noepesu Village is suitable for planting coffee plants with an agroforestry scheme. To overcome the problem of limited water, drip irrigation system technology can be applied. The use of drip irrigation as an agricultural technology in Noepesu village has been carried out by many farmer groups. Still, the installation process does not consider the pipe specifications (pipe length and pipe diameter) and the condition of agricultural land. This causes the service life of drip irrigation to be not long. If this continues, of course, it will increase system installation costs. To optimize service life, a hydraulics analysis method is needed for drip irrigation pipe network systems that take into account pipe specifications and agricultural land conditions.The hydraulics analysis of the drip irrigation network system determines the emitter’s water flow rate. The emitter flow rate forms a nonlinear equation known as the closed pipe equation. In the process of solving these equations, numerical methods can be used, specifically the Newton-Raphson method. This study focuses on applying the Newton-Raphson method to calculate the amount of water discharge from each emitter of the drip irrigation network system on the farmland of the Mutis Cemerlang Farmer Group in Noepesu Village. The drip irrigation system is designed with 250 nodes, 275 pipes, 26 loops, and 86 outlets divided into two sides, with the left side containing 84 outlets with one emitter and the right side containing 102 outlets with two emitters. The amount of water discharge for each emitter is 0,0008 ml/second≤Q≤2,6 ml/second for the left side and 0,001 ml/second≤Q≤1,1 ml/second for the right side, as determined by simulation calculations utilizing the Newton-Raphson method and Matlab software. The simulation results show that the amount of water discharge at each emitter is ideal in the first iteration because it has a discharge correction value (∆Q)≈0.References
Abduraimova, D., Otakhonov, M., Jalilov, S., & Vokhidova, U. (2022). Hydraulic Calculation Lateral in Drip Irrigation. IOP Conference Series: Earth and Environmental Science, 1112(1), 1–7. https://doi.org/10.1088/1755-1315/1112/1/012132
Assis, G. A. D., Scalco, M. S., Guimarães, R. J., Colombo, A., Dominghetti, A. W., & Matos, N. M. S. D. (2014). Drip Irrigation in Coffee Crop Under Different Planting Densities: Growth and Yield in Southeastern Brazil. Geoderma, 18(11), 1116–1123. https://doi.org/10.1590/1807-1929/agriambi.v18n11p1116-1123
Ates, S. (2016). Hydraulic Modelling of Closed Pipes in Loop Equations of Water Distribution Networks. Applied Mathematical Modelling, 4(2), 966–983. http://dx.doi.org/10.1016/j.apm.2015.06.017
Bachrun, R., Pallu, M. S., Thaha, M. A., & Bakri, B. (2020). Effect of water discharge variation on water levels and flow characteristics in pipeline networks. IOP Conference Series: Earth and Environmental Science, 419(1), 1-6. https://doi.org/10.1088/1755-1315/419/1/012134
Brkić, D., & Praks, P. (2019). Short Overview of Early Developments of the Hardy Cross Type Methods for Computation of Flow Distribution in Pipe Networks. Applied Sciences, 9(10), 1–15. https://doi.org/10.3390/app9102019
Delvion, E. B. S. D., Mada, G. S., Dethan, N. K. F., & Tefa, A. Y. (2021). Pendampingan Penerapan Teknologi Jaringan Irigasi Tetes Pada Kelompok Tani Mutis Cemerlang Desa Noepesu Kecamatan Miomaffo Barat. Jurnal Pasopati, 3(4), 202–208. https://doi.org/10.14710/pasopati.2021.12503
Derlukiewicz, N., Mempel-Śnieżyk, A., Mankowska, D., Dyjakon, A., Minta, S., & Pilawka, T. (2020). How do Clusters Foster Sustainable Development? An Analysis of EU Policies. Sustainability, 12(4), 1–15. https://doi.org/10.3390/su12041297
Hussain, M., & Gupta, S. P. (2017). A Field Study on Hydraulic Performance of Drip Irrigation System for Optimization of Operating Pressure. Journal of Applied and Natural Science, 9(4), 2261–2263. https://doi.org/10.31018/jans.v9i4.1521
Ifiemi, E., Sodiki, J., & Nkoi, B. (2020). Analysis of a Water Distribution Network by Newton-Raphson Multivariable Method: A Case of Negligible Minor Losses. Innovative Systems Design and Engineering, 11(2), 15–28. https://doi.org/10.7176/ISDE/11-2-03
Jarwar, A. H., Wang, X., Wang, L., Mangi, N., Ma, Q., & Shuli, F. (2019). Performance and Evaluation of Drip Irrigation System, and Its Future Advantages. Journal of Biology, Agriculture and Healthcare, 9(9), 25–35. https://doi.org/10.7176/JBAH/9-9-04
Javed, A., Ali, E., Binte Afzal, K., Osman, A., & Riaz, Dr. S. (2022). Soil Fertility: Factors Affecting Soil Fertility, and Biodiversity Responsible for Soil Fertility. International Journal of Plant, Animal and Environmental Sciences, 12(01), 21–33. https://doi.org/10.26502/ijpaes.202129
Karim, I., & Sahib, S. (2019). Hydraulic Analysis of Irrigation Network for the Proposed Taq-Taq Dam Using EPANET Software. Engineering and Technology Journal, 37(10A), 429–434. https://doi.org/10.30684/etj.37.10A.8
Khalil, A. H. P. S., Hossain, Md. S., Rosamah, E., Azli, N. A., Saddon, N., Davoudpoura, Y., Islam, Md. N., & Dungani, R. (2015). The Role of Soil Properties and Its Interaction Towards Quality Plant Fiber: A Review. Renewable and Sustainable Energy Reviews, 43, 1006–1015. https://doi.org/10.1016/j.rser.2014.11.099
Magdić, I., Safner, T., Rubinić, V., Rutić, F., Husnjak, S., & Filipović, V. (2022). Effect of Slope Position on Soil Properties and Soil Moisture Regime of Stagnosol in The Vineyard. Journal of Hydrology and Hydromechanics, 70(1), 62–73. https://doi.org/10.2478/johh-2021-0037
Makris, K. F., Langeveld, J., & Clemens, F. H. L. R. (2020). A review on the durability of PVC sewer pipes: Research vs. practice. Structure and Infrastructure Engineering, 16(6), 880–897. https://doi.org/10.1080/15732479.2019.1673442
Mokarram, M., & Hojati, M. (2016). Comparison of Landform Classifications of Elevation, Slope, Relief and Curvature with Topographic Position Index in the South of Bojnoord. Ecopersia, 4(2), 1343–1357. https://doi.org/10.18869/modares.ecopersia.4.2.1343
Moosavian, N. (2017). Multilinear Method for Hydraulic Analysis of Pipe Networks. Journal of Irrigation and Drainage Engineering, 143(8), 1-15. https://doi.org/10.1061/(ASCE)IR.1943-4774.0001193
Moosavian, N., & Jaefarzadeh, M. R. (2014). Hydraulic Analysis of Water Distribution Network Using Shuffled Complex Evolution. Journal of Fluids, 2014, 1–12. https://doi.org/10.1155/2014/979706
Nabiollahi, K., Golmohamadi, F., Taghizadeh-Mehrjardi, R., Kerry, R., & Davari, M. (2018). Assessing The Effects of Slope Gradient and Land Use Change on Soil Quality Degradation Through Digital Mapping of Soil Quality Indices and Soil Loss Rate. Geoderma, 318, 16–28. https://doi.org/10.1016/j.geoderma.2017.12.024
Nguyen, K. Q., Mwiseneza, C., Mohamed, K., Cousin, P., Robert, M., & Benmokrane, B. (2021). Long-term testing methods for HDPE pipe - advantages and disadvantages: A review. Engineering Fracture Mechanics, 246, 1–15. https://doi.org/10.1016/j.engfracmech.2021.107629
Pramudo, L. T. H., Djarwanti, N., & Surjandari, N. S. (2016). Analisis Stabilitas Lereng dengan Terasering di Desa Sendangmulyo, Tirtomoyo, Wonogiri. e-Jurnal Matriks Teknik Sipil, 470–475. https://doi.org/10.20961/mateksi.v5i1.36949
Saad, A., Ahweedi, H., Abdulkaleq, H. E.-D., Khaleel, A., & Abdulsalam, A. (2017). Comparison of Newton Raphson and Hard Darcy Methods for Gravity Main Nonlinear Water Network. IOSR Journal of Mechanical and Civil Engineering, 14(03), 07–17. https://doi.org/10.9790/1684-1403030717
Teixeira, G. da S., Vilalta-Alonso, G., & Mendes, L. J. (2021). Evaluation of Nonlinear Iterative Methods on Pipe Network. IngenierÃa Mecánica, 24(2), 19–30. https://ingenieriamecanica.cujae.edu.cu/index.php/revistaim/article/view/656/1168
Downloads
Published
Issue
Section
License
Authors who publish articles in JTAM (Jurnal Teori dan Aplikasi Matematika) agree to the following terms:
- Authors retain copyright of the article and grant the journal right of first publication with the work simultaneously licensed under a CC-BY-SA or The Creative Commons Attribution–ShareAlike License.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).