ANALISIS KETAHANAN PRODUK SOLAR CELL BERBANTUAN SOFTWARE LOGGER PRO

Authors

  • Hamzah Hamzah Universitas Ahmad Dahlan
  • Moh. Toifur UNIVERSITAS AHMAD DAHLAN

DOI:

https://doi.org/10.31764/orbita.v5i2.1191

Keywords:

Fill factor and efficiency solar cell, logger pro.

Abstract

ABSTRAK

Penelitian ini bertujuan untuk menentukan kualitas solar cell pada nilai fill factor (ff) dan efisiensinya ( ). Data tegangan Vi dan Ii diambil secara otomatis menggunakan software logger pro dan menggunakan analisis persamaan eksponensial . Data diambil dari solar cell merk polikristal type (99×69) mm2 yang dipaparkan di depan sumber cahaya lampu bohlam philips 100W/220V sejauh 18 cm pada Ir sebesar 983, 344 W/m2. Nilai Pmax terbesar besar berada pada sudut kemiringan 30o sebesar 0,0231 watt. ff yaitu 67%, efisiensi 22%. Pada sudut 30o tersebut arah cahaya datang tegak lurus dengan bidang solar cell. Sedangkan ff terendah kemiringan 70o yaitu 0,5362 dan efisiensi 13%.

 

Kata kunci: Fill factor dan efisiensi solar cell; logger pro.

 

ABSTRACT

This study aims to determine the quality of solar cell on the value of the fill factor (ff) and efficiency (h). The voltage data Vi and Ii are taken automatically using logger pro software and using exponential equation analysis. The data was taken from polycrystalline solar cell type (99×69) mm2 which was presented in front of the light source of Philips lamp bulb 100W/220V as far as 18 cm at Ir of 983, 344 W/m2. The largest Pmax value is at a slope angle of 30o of 0,0231 watts. ff is 67%, efficiency is 22%. At the 30o angle the direction of the light comes perpendicular to the plane of the solar cell. While the lowest ff is 70o, which is 0,5362 and efficiency is 13%.

 

Keywords: Fill factor and efficiency solar cell; logger pro.

Author Biography

Hamzah Hamzah, Universitas Ahmad Dahlan

UNIVERSITAS AHMAD DAHLAN

References

Aliev R., Alinazarova, M.A., Ikranov, R.G., and Ismanova O.T. (2011). The Fill Factor Of Loaded Current-Voltage Performance Of Solar Cells And Its Role For Determining Their Temperature Properties. Applied Solar Energy. 7(2).118-120.

Bhalchandra, V.Cand Sadawarte, Y.A. (2015). “The Factors Affecting The Performance Of Solar Cellâ€, International Journal of Computer Applications (0975 – 8887): M-Tech Student B.D.C.O.E. Sewagram Wardha-India

Chegaar, M, Z. Ouennoughi, F. Guechi, dan Langueur. (2003). Determination of Solar Cells Parameters under Illuminated Conditions, Journal of Electron Devices. 2. 17-21.

Das, A. K. (2011). An Explicit J-V Model OfS olar Cell For Simple Fill Factor Calculation, Solar Cell Energy. 85(9). 1906–1909

Erlita. (2014). Energi Supply Solar cell pada Sistem Pengendali Portal Parkir Otomatis Berbasis mikrokontroler AT89S52, https://scholar.google.com /diakses pada tanggal 3 April 2019

Gastineau, J. (1999). Logger proTM User’s manual. ISBN 0-918731-91-7 (Macintons)

Guliani R., Jain A., and Kapoor A. (2012). Exact analytical analysis of Dye-Sensitized Solar Cell: Improved Method and Comparative Study, There newble energy Journal. 2(2). 549-60

Hamdya, M. Adel. (1994). A New Model For The Current-Voltage Output Characteristics Of Photovoltaic Modules. Journalof Power Sources. 50(1). 11-20.

Maammeur, H. Hamidat, A and Loukarfi, L. (2013). A Numerical Resolution Of The Current-Voltage Equation for a Real Photovoltaic Call, Energi Procedia 36, Fakulti Of Technology, Universitas Hassiba Benbouali, pages 1212-122

Rashmi, S. (2012). Solar Cell, Internasional Journal Of Scientificand Research Publicasions, 2(7). 2250-31536666

Sukandarrumidi. (2016). Energi Terbarukan.Yogyaakarta: Universitas Gajah Mada

Toifur, M., (2013). Perbaikan Penentuan Nilai Fill Factor Sel Surya Dengan Bantuan Fitting Data Dan Teknik Modified Regulafalseâ€, Prosiding Seminar Nasional Penelitian, Pendidikan dan Penerapan MIPA. UN Yogyakarta: Fakultas MIPA, Universitas Negeri Yogyakarta

Yulinar, A., Khairul, S., dan Assaidah, (2017). Measurement of Solar Panel Output Involving Controller and Reflector. Internasional Journal Energy and Clean Environment. 15(1). 138-142.

Downloads

Published

2020-01-05

Issue

Section

Articles